Heavy-Duty Cut-Off Wheels, 15/16 in Cutting Dia.

High-performance, 2.3hp G55 (AC/DC) motor powers through material removal tasks, while minimizing the potential for overloads. Dust Ejection System™ provides dual-process protection against dust and debris injection. Low-profile, jam-pot gear case enables precise gear alignment, ensuring smoother, quieter operation. Auto-off brush-failure system cuts power when brushes need replacing, reliably avoiding costly maintenance issues. Vibration-reducing side handle helps enhance worker comfort. Keyless guard allows user to adjust for maximum personal safety. Type: Angle; Wheel Diameter: 5"; 6"; Speed: 9,000 rpm; Application: Metalworking.

High-power performance meets question-free reliability with the 2.3hp G55 (AC) motor. Dust Ejection System™ provides dual-process protection against dust and debris injection. E-Clutch® performs an instantaneous shut-down should a potentially catastrophic wheel pinch or wheel stall occur. Automatic Power-Off® system protects the motor against overloads. Power-Loss Reset® prevents accidental re-starts following a power disruption. Low-profile, jam-pot gear case enables precise gear alignment, ensuring smoother, quieter operation. Type: Angle; Wheel Diameter: 4 1/2"; 5"; Speed: 11,000 rpm; Application: Metalworking.

High-performance, 2.3hp G55 (AC/DC) motor powers through material removal tasks, while minimizing the potential for overloads. Dust Ejection System™ provides dual-process protection against dust and debris injection. Low-profile, jam-pot gear case enables precise gear alignment, ensuring smoother, quieter operation. Auto-off brush-failure system cuts power when brushes need replacing, reliably avoiding costly maintenance issues. Vibration-reducing side handle helps enhance worker comfort. Keyless guard allows user to adjust for maximum personal safety. Type: Angle; Wheel Diameter: 4 1/2"; 5"; Speed: 9,000 rpm; Application: Metalworking.

High-power performance meets question-free reliability with the 2.3hp G55 (AC) motor. Dust Ejection System™ provides dual-process protection against dust and debris injection. E-Clutch® performs an instantaneous shut-down should a potentially catastrophic wheel pinch or wheel stall occur. Automatic Power-Off® system protects the motor against overloads. Power-Loss Reset® prevents accidental re-starts following a power disruption. Low-profile, jam-pot gear case enables precise gear alignment, ensuring smoother, quieter operation. Type: Angle/Cut-Off; Wheel Diameter: 6"; Speed: 9,000 rpm; Application: Metalworking.

High-power performance meets question-free reliability with the 2.3hp G55 (AC) motor. Dust Ejection System™ provides dual-process protection against dust and debris injection. E-Clutch® performs an instantaneous shut-down should a potentially catastrophic wheel pinch or wheel stall occur. Automatic Power-Off® system protects the motor against overloads. Power-Loss Reset® prevents accidental re-starts following a power disruption. Low-profile, jam-pot gear case enables precise gear alignment, ensuring smoother, quieter operation. Type: Angle/Cut-Off; Wheel Diameter: 6"; Speed: 9,000 rpm; Application: Metalworking.

Get it together: a powerful motor, high-speed cutting and excellent overload protection make this saw next to irresistible. Soft start system slowly builds up machine torque, significantly extending gear and motor life. Quik-Change™ release enables wrench- and key-free wheel changes. Quik-Fence™ blade-angle adjustability takes the guessing and most of the work out of cutting accuracy. Quick-lock vise allows you to prep your materials at record speeds. Extra-wide steel base may be bolted to a bench for added stability. Saw Type: Corded Chop Saw; Applicable Material: Metal; Blade Diameter: 14"; Handle Type: D-Grip.

Saw through it with this fast (up to 3,000 spm), easy to position, variable-speed cordless kit. Four-position keyless blade clamp simplifies flush cutting while enabling quick and easy blade changes. Adjustable, pivoting shoe features an open top for maximum visibility. Electric brake prevents blade coasting, enhancing efficiency and minimizing the potential for injury. Anti-slip grip gives you an ergonomic two-finger trigger and a safety lock for maximum comfort and control. XRP™ battery delivers longer run-times than standard rechargeable packs, allowing you to get more done on a single charge. Saw Type: Cordless Reciprocating Saw; Applicable Material: Metal; Plastic; Wood; Power: 1 18V XRP Battery; Speed: 0 - 3,000 spm.

Get superior drilling and fastening performance out of the high-powered, high-speed Cordless XRP™ kit. Patented all-metal transmission features three speed settings, making this the right tool for just about any drilling job. Worker-first design and 360° side paddle provide excellent balance and better hand-held control. Heavy-duty ratcheting chuck simplifies bit changes while minimizing the potential for slippage. Bright LED work-light spotlights your target. XRP™ battery delivers longer run-times than standard rechargeable packs, allowing you to get more done on a single charge. Power: 450 UWO (unit watt out). Power Drills Type: Cordless; Chuck Capacity: 1/2"; Chuck Type: Metal Ratcheting; Voltage: 18 V.

XRP™ Nano Phosphate Li-Ion extended run-time batteries provide superior ergonomics, long run-time and battery life. Patented 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time. LED worklight provides increased visibility in confined spaces. Power Drills Type: Cordless; Chuck Capacity: 1/2"; Chuck Type: Self-Tightening; Voltage: 18 V.

High-torque wrench kit helps you perform a wide range of heavy-duty fastening applications. Heavy-duty impact mechanism delivers torque directly to the fastener while minimizing kickback. Durable magnesium gear case and all-metal transmission provide professional-grade reliability. Rocker switch makes reversing direction a snap. Ergonomic grip minimizes vibration transfer, enhancing user comfort. XRP™ battery delivers longer run-times than standard rechargeable packs, allowing you to get more done on a single charge. Drive: 1/2 in - Maximum Torque: 300 ft/lb - Maximum Speed: 1,650rpm. Tool Type: Impact Wrench; Head Type: 1/2" Drive; Torque Rating: 300 ft-lbs; Material(s): Magnesium/Metal.

AC/DC, forward/reverse rocker switch ideal for backing out jammed bits or mixing drywall mud. 5/8" spindle for increased durability in high torque applications. 2-position rear spade handle and 3-position side handle gives greater control for all drilling and mixing applications. Triple gear reduction provides increased torque and reduces gear stress. Low 450 RPM provides increased torque for drilling large diameter holes in wood and metal. Power Drills Type: Heavy Duty Electric; Chuck Capacity: 1/2"; Chuck Type: Keyed; Handle Type: Spade.

Rear pivot depth of cut adjustment allows your hand to remain behind the tool at all depth of cuts. Powerful motor made for long life and difficult applications. Heavy-gauge, high-strength aluminum alloy base for increased durability on worksite. 50 degree beveling capacity increases capacity in various applications. Electric brake stops blade after use. 100% ball and roller bearings extend life of tool. Saw Type: Corded Circular Saw; Applicable Material: ABS; Fiberglass; Metal; Plastic; PVC; Wood; Blade Diameter: 7 1/4"; Power: 15 A.

High-temperature, high-power industrial-grade heat gun bends plastic, cures adhesives, dries parts, shrinks tubing, strips paint and more. Powerful universal motor delivers excellent air-pushing performance (up to 23 CFM). Adjustable non-slip stand enables hands-free use. Sturdy die-cast metal housing and professional-quality internal parts ensure long-lasting, reliable performance. Torch/Welding Rig Type: Heat Gun; Technology: Electric; Power/Fuel Type: AC; Application: Construction; Interior Design; HVAC; Plastic Working; Painting; Plumbing; Shipping/Receiving.

6" Angle Grinders, 13.5 A, 9,600 rpm, Sliding Switch w/Lock

6" Angle Grinders, 13.5 A, 9,600 rpm, Paddle Switch, Non-Locking

6" Angle Grinders, 14.5 A, 9,600 rpm, Paddle Switch

RUBBER POLISHING PAD HOLDER, Accessory

BACK SPOT-5/16D-5/32PH 07R, Specialty Tools

BACK SPOT-11/16D-1/4PH 07R, Specialty Tools